If you play the golf game, you’ll need tools. Golf balls, irons, trolleys, watches, practice nets, bags, and everything in between. You won’t need everything, especially if you’re a beginner.
However, some of these are the lifeblood of the game. Anyone who is looking at improving their game must gather them (while practicing consistently, of course).
This article isn’t about all golf accessories though. It’s rather about two golf irons: Taylormade M6 vs PING G410 Irons. These two are the talking point of a lot of people. Which one is better?
If you’re about to get a new set of irons and have settled on these two but finding it hard going with one, this article can help you.
I’m going to spell out the differences between them. But I won’t stop there. I’ll also review them so you know what you’re buying. I hope you’ll leave this article armed with a new set of knowledge and most importantly, be able to decide on one…
Let’s get in on it:
Taylormade M6 vs PING G410 Irons – A Comparison
PING G410 Golf Irons
PING was the sound that came off as the metal club struck the golf ball. Way back in 1959, the founder, Karsten Solheim named his company after this reverberating sound.
However, as the following years have shown, the Ping iron has given the golfers something more than sound. What’s it?
According to President John K. Solheim, Ping engineers took up the challenge to make smaller Irons with better forgiveness.
The Best Forgiveness Out There!
Right from the earliest Ping K1 Iron, the G series has reshaped the way technology works for Golfers.
Mid Handicappers who play regular shafts will find good dispersion on poor contacts with one of these Irons. To say – the G410 gives more forgiveness for the less accomplished golfer – a hefty 8% more!
Tungsten Weights for Stability
Compared to the clubs of the past, G410 is designed to look sleeker with a shorter blade length and a slightly larger clubface – a much-needed improvement from its earlier G400 Iron.
To top that, it has now introduced something that golfers have never seen in an iron – tungsten weights inbuilt on the toe and the hosel for more stability and consistency on off-center hits. However, there’s more that puts it in the ‘Game Improvement’ category.
The Hidden COR-Eye Technology
If TaylorMade boasts about its Speed Bridge, then Ping has come up with its COR-Eye Technology. It’s the technology that’s hidden behind the clubface – unlike the Speed Bridge.
This technology ensures flexibility across the entire clubface to increase the ball speed – up to 3 mph over Ping G400 and earlier versions. For a mid-handicapper, striking the ball from the center and off-center ensures the same results – straighter and longer strikes.
Also, the G410 is one of those irons that are priced less than $1000, cheaper than the Ping i500. Again – more for less!
Let’s Review and Compare
- If you still use the previous versions of Ping G series, then it is highly recommended to switch to Ping G410 as it has a 3% smaller blade length, 10% less offset, and 8% more forgiveness, thus giving you the maximum advantage on the turf.
- The Tungsten weights add weight to the Iron. So if you are a mid-handicapper looking to lower your handicap, then these additions will give good strikes off the club.
- Even though the Callaway Rogue Iron wins with its infused tungsten, the Ping G410’s Tungsten weights have a superlative advantage due to its smaller blade with increased forgiveness.
- Ping G410 and TaylorMade are newer and better than Srixon Z585, however, the V Tour Sole design of Srixon has a comparative advantage over difficult or uneven turf conditions.
TaylorMade Golf M6 Iron Set
Stephen Covey says, “Nothing is as fast as the speed of trust”. If you are a speed enthusiast, then the latest TaylorMade Golf M6 Iron Set is the obvious choice.
Let’s face it. The innovative Speed Bridge Technology has nailed it and made M6 the overall killer that has changed for the better and unlocked new value for mid-handicap golfers.
See for yourself.
Speed Pocket Technology for Better Speed
M6 (which is basically the bigger version of M5) is the first iron that uses a flexible thru-slot Speed Pocket to generate ball speed. This feature makes it better than previous M2 and M4 sets.
Rather than using a welded supplementary piece, it is now a single piece of a stainless steel beam with a polymer vibration dampener that joins the crown to the sole of the iron, thus improving the feel, increasing the sound, and giving it all that a golfer needs – a visual appeal.
Quick Review – this technology has changed the way the iron face behaves with ball impact.
Now, what about getting the ball airborne?
360° undercut Fluted Hosel for Better Ball Flight
A pro-golfer trusts the loft and grooves on the iron rather on his hands and wrists to get the ball in the air. M6 is designed with a 360° undercut Fluted Hosel that generates a strong ball flight with the help of its launch angle.
This relocates the weight to the back of the head and creates a low center of gravity.
A Game Changer
Game Improvement Iron – This is what the manufacturers call the M5 and M6. And by all means, it is!
These two recent versions of 2019 are the fourth innovative generation of the M series and the biggest game-changer is the speed. The M5 and M6 versions deliver shots 1.5 mph higher than the M2 and M4 versions, thus giving them a substantial advantage.
In terms of yards, M6 goes more yards compared to M5 due as the spots are 1.5° stronger.
Let’s Review and Compare
- It may seem that the M6 lacks the feel compared to counterparts like the Mizuno and Srixon forged. However, its foam infused design is a win-win for mid-handicappers looking for distance and speed.
- In terms of how the ball impact feels to your ears, Callaway Rogue Irons wins with its Urethane Microsphere Technology.
- TaylorMade’s innovative technological improvement trumps all other Irons as it consistently gives the best speed and yardage – all that a golfer needs.
Need Balls for Your Game? Read: Golf Ball Compression Graph: Choosing the Best Balls